Header Ads

How To install Stock Firmware On Vivo Y51L

How To install Stock Firmware On Vivo Y51L XN Logos 4.5 of 5
Install Stock Rom On Vivo Y51L- Download And Install Stock Firmware On vivo Y51L and Unbrick it, Here I Will Show You How to Install Stock...
Install Stock Rom On Vivo Y51L-
Download And Install Stock Firmware On vivo Y51L and Unbrick it, Here I Will Show You How to Install Stock Firmware On Vivo Y51L,

Vivo Y51L smartphone was launched in January 2016. The phone comes with a 5.00-inch touchscreen display with a resolution of 540 pixels by 960 pixels,The Vivo Y51L is Run On Android 5.1 OS powered by 1.2GHz quad-core Qualcomm Snapdragon 410 processor and it comes with 2GB of RAM. The phone packs 16GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Vivo Y51L packs a 8-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
The Vivo Y51L is a dual SIM (GSM and GSM) smartphone that accepts two Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, 3G, 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Proximity sensor, Ambient light sensor, Accelerometer, and Gyroscope.

Requirements-
Related To Vivo Y51L-
Driver Installation-
1- Download and install Qualcomm driver. While installing driver avoid using cable for successful Installation.
2- After installation, connect Phone to PC using USB cable.
3- While connecting to PC, phone should be switched off and press volume up & down as boot key.
4- If it makes Qualcomm port, then driver has been successfully installed.

How To Install Stock Rom On Vivo Y51L-
Step: 1- Download the QPST tool & driver.
Step: 2- Make sure your device has the Power to support flashing.
Step: 3- Run QFIL tool.

Step: 4- Click on Browse under the Programmer path to select MBN File.

Step: 5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.

Step: 6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:

a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.

Step: 7- Switch off the device and connect it to PC by pressing Volume up & down key.
Step: 8- Click on Select Port and choose the port.

Step: 9- Click on Download to start flashing.

Step: 10- Unplug USB cable, when Finish Download appears.
Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.
Suggested-
Search tag-
Install Stock rom On Vivo y51l, unbrick vivo y51l, how to unbrick vivo y51l, unbrick guide vivo y51l, install stock rom vivo y51l, download stock rom vivo y51l, install stock firmware on vivo y51l, install official firmware on vivo y51L,vivo y51l stock rom download install method, how to install stock rom on vivo y51l, flah file for vivo y51l, flash tool vivo y51l, twrp vivo y51l, flash file download vivo y51l,

No comments

Powered by Blogger.