Header Ads

Download and Install tested flash File [Firmware] Intex Aqua Lions E1

Download and Install tested flash File [Firmware] Intex Aqua Lions E1 XN Logos 4.5 of 5
Official Firmware Intex Aqua Lions E1- Official Nougat Firmware Now available for Intex Aqua Lions E1 , in this article you will learn...
Official Firmware Intex Aqua Lions E1-
Official Nougat Firmware Now available for Intex Aqua Lions E1, in this article you will learn How to Flash Intex Aqua Lions E1 using the SPD tools, This is a Latest official Firmware for Intex Aqua Lions E1 which is flashable with the SPD tools. The Intex Aqua Lions E1 is powered by 1.5GHz quad-core processor and it comes with 2GB of RAM. The phone packs 16GB of internal storage that can be expanded up to 32GB via a microSD card. As far as the cameras are concerned, the Intex Aqua Lions E1 packs a 8-megapixel primary camera on the Rear and a 5-megapixel front shooter for selfies.
Note-
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For Intex Aqua Lions E1-
File Name Downloads
SPD tools Download
Stock Rom Intex Aqua Lions E1 Download
Driver [Latest] Download
How to Flash Stock Firmware On Intex Aqua Lions E1-
  1. Download SPD upgrade Tools From above And extract zip{come with Rom}
  2. Download and Extract Stock Rom file From Above
  3. Run upgrade Tools, exe file from setup
  4. Then Click On Load Package then Select pac{stock Rom} file From your Firmware Folder
  5. after that power off your Device and connect to pc via usb Cabal
  6. then Click on start wait some time while it flash firmware
  7. after success Disconnect device From PC and Start It you Got Origenal Rom/software
So This Is the Complete Guide to install stock Rom on Intex Aqua Lions E1, if you face any Problem Let us know Via Comment,
Search tag-
stock rom Intex Aqua Lions E1, firmware, flash file Intex Aqua Lions E1, stock rom Intex Aqua Lions E1, official rom Intex Aqua Lions E1, factory image Intex Aqua Lions E1, rom download Intex Aqua Lions E1, Intex Aqua Lions E1 flash file without password,

No comments

Powered by Blogger.