Header Ads

How to Install Stock Firmware [Flash File] on Evercoss U6

How to Install Stock Firmware [Flash File] on Evercoss U6 XN Logos 4.5 of 5
Stock ROM For Evercoss U6: official Stock ROM Firmware aka Flash File now available for Evercoss U6 , in the article you will learn H...
Stock ROM For Evercoss U6:
official Stock ROM Firmware aka Flash File now available for Evercoss U6, in the article you will learn How to Flash Evercoss U6 using the SP flash tools, You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development. The Evercoss U6 is Run on Android 7.XX OS Powered by Mediatek Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.

Flashing The official Stock Rom on Evercoss U6 will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on Evercoss U6,
Note-
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For Evercoss U6-
File Name Download
V-COM Driver Download
Firmware Evercoss U6 Download
SP Flash tools Download
How to Install Stock ROM on Evercoss U6-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and Run SP flash tools exe file.{extracted In Above Steps]
Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.
Step 6.select what you want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}[if the battery is non Removable switch off phone and connect with battery]
Step 8.wait while flashing is complete it take a few Minut to flash after success.insert battery and switch on your smartphone.
Search tag-
firmware Evercoss U6, Flash File Evercoss U6, Stock ROM Evercoss U6, cara flash Evercoss U6, para flash Evercoss U6, unbrick fix repair Evercoss U6,

No comments

Powered by Blogger.