How to Install official Firmware on Evercoss U50B

Stock Firmware for Evercoss U50B:

official Stock Firmware aka Flash file now available For Evercoss U50B, In the article you can Download tested Flash File for Evercoss U50B. the ROM come in PAC Format Which is Flashable via the SPD flash tools. You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development. The Evercoss U50B  is Run on Android 7.XX OS Powered by SPD Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.

Flashing The official Stock Rom on Evercoss U50B  will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on Evercoss U50B.
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For Evercoss U50B-
File Name Downloads
SPD tools Download
Stock ROM Evercoss U50B Download
Driver [Latest] Download
How to Flash Stock Firmware On Evercoss U50B-
  1. Download SPD upgrade Tools From above And extract zip{come with Rom}
  2. Download and Extract Stock Rom file From Above
  3. Run upgrade Tools, exe file from setup
  4. Then Click On Load Package then Select pac{stock Rom} file From your Firmware Folder
  5. after that power off your Device and connect to PC via usb Cable
  6. Then Click on start wait some time While it flash firmware
  7. after success Disconnect device From PC and Start It you Got Origenal Rom/software
So This Is the Complete Guide to install stock Rom on Evercoss U50B if you face any Problem Let us know Via Comment,
Search tag-
firmware Evercoss U50B, flash file Evercoss U50B, stock rom Evercoss U50B, flashing guide Evercoss U50B, rom download Evercoss U50B, cara flash Evercoss U50B, rom download for Evercoss U50B

: Stock Rom

Post a Comment