Header Ads

How to Install official Firmware Evercoss S45

How to Install official Firmware Evercoss S45 XN Logos 4.5 of 5
Stock Firmware for Evercoss S45: official Stock Firmware aka Flash file now available For Evercoss S45, In the article you can Downl...
Stock Firmware for Evercoss S45:

official Stock Firmware aka Flash file now available For Evercoss S45, In the article you can Download tested Flash File for Evercoss S45. the ROM come in PAC Format Which is Flashable via the SPD flash tools. You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development. The Evercoss S45  is Run on Android 7.XX OS Powered by SPD Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.

Flashing The official Stock Rom on Evercoss S45  will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on Evercoss S45.
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For Evercoss S45-
File Name Downloads
SPD tools Download
Stock ROM Evercoss S45 Download
Driver [Latest] Download
How to Flash Stock Firmware On Evercoss S45-
  1. Download SPD upgrade Tools From above And extract zip{come with Rom}
  2. Download and Extract Stock Rom file From Above
  3. Run upgrade Tools, exe file from setup
  4. Then Click On Load Package then Select pac{stock Rom} file From your Firmware Folder
  5. after that power off your Device and connect to PC via usb Cable
  6. Then Click on start wait some time While it flash firmware
  7. after success Disconnect device From PC and Start It you Got Origenal Rom/software
So This Is the Complete Guide to install stock Rom on Evercoss S45 if you face any Problem Let us know Via Comment,
Search tag-
firmware Evercoss S45, firmware, flash file, stock rom Evercoss S45, flashing Evercoss S45, rom download Evercoss S45, unbrick Evercoss S45, repair Evercoss S45,

No comments

Powered by Blogger.