Header Ads

Download & Install PD1814F Firmware Vivo V11 / Pro [1804]

Download & Install PD1814F Firmware Vivo V11 / Pro [1804] XN Logos 4.5 of 5
Official Firmware for Vivo V11 Pro: Official Firmware for the Vivo V11 Pro is Now available for Download , In this article You will le...
Official Firmware for Vivo V11 Pro:

Official Firmware for the Vivo V11 Pro is Now available for Download, In this article You will learn how you can Flash Vivo V11 Pro using the QPST aka QFIl tools, it's a Easy Process and You can Do it using the below instructions.

You can use Firmware file to to unbrick your Phone, to fix software issue and in Vivo V11 Pro Development. The Vivo V11 Pro is Run on Android 8.XX OS Powered by a Qualcomm Processor and it is also a Dual SIM smartphone with Good Software Specs. Follow below Guide to Install Stock ROM on Vivo Nex,
Note:
  • Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  • It will erase all your personal data including data of internal storage, so we advise you first to take a complete backup of your phone and then proceed.
  • Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
Read Also-
Requirements-
  • QPST tools
  • Vivo V11 Pro PD1814F Firmware Here [Password: firmWaRe27]
How to Install official Firmware on Vivo V11 Pro-
The Whole Process Complete In 2 Steps-
  • Driver Installation
  • Software Upgrade
Driver Installation-
1- Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.

2- After installation, connect Phone to PC using USB cable.

3- While connecting to PC, phone should be switched off and press volume up & down as boot key.

4- If it makes Qualcomm port, then driver has been successfully installed.
Software Upgrade-
Step: 1- Download the QPST tool & driver and Rom File From above and extract in Folder,

Step: 2- Make sure your device has the Power to support flashing.

Step: 3- Run QFIL tool.Rom Extract folder,

Step: 4- Click on Browse under the Programmer path to select MBN File.

Step: 5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
Step: 6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
Step: 7- Switch off the device and connect it to PC by pressing Volume up & down key.

Step: 8- Click on Select Port and choose the port.

Step: 9- Click on Download to start flashing.

Step: 10- Unplug USB cable, when Finish Download appears.

Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.

So This Is A Complete Guide to Install stock Rom on Vivo V11 Pro if you have any question Let Us know Via Comment,
Search tag-
Vivo V11 Pro firmware, Vivo V11 Pro flash file, Vivo V11 Proflash file without password, Vivo V11 Pro ROM, Vivo V11 Pro latest ROM,Vivo V11 Pro Download, Vivo V11 Pro support.

No comments

Powered by Blogger.