Header Ads

SPC X3 official ROM Firmware android 8.1 MT6739 [FRP Done]

SPC X3 official ROM Firmware android 8.1 MT6739 [FRP Done] XN Logos 4.5 of 5
Stock ROM/Firmware For SPC X3 : Official Stock ROM aka Flash File Now available for  SPC X3 in the article you can Download Latest Fir...
Stock ROM/Firmware For SPC X3:

Official Stock ROM aka Flash File Now available for  SPC X3 in the article you can Download Latest Firmware file For SPC X3. You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development.

The  SPC X3 is Run on Android 8.XX OS Powered by Mediatek Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, accelerometer and Ambient light sensor.

Flashing The official Stock Rom on  SPC X3 will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Bellow Step by Step guide to Install Official Rom on SPC X3,
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. SP Flash tools Here
  2. VCom Driver Here
  3. Firmware:
How to Install Stock ROM on SPC X3-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and Run SP flash tools exe file.{extracted In Above Steps]
Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.
Step 6.select what you want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}[if the battery is non Removable switch off phone and connect with battery]
Step 8.wait while flashing is complete it take a few Minut to flash after success.insert battery and switch on your smartphone.
  1. How to bypass FRP on This phone Here
Search tag-
SPC X3 firmware,SPC X3 flash file, SPC X3 flashing, SPC X3 download, SPC X3 ROM, SPC X3 cara flash, SPC X3 flashing, SPC X3 root, SPC X3 twrp,

No comments

Powered by Blogger.