Header Ads

Download official Android 9.0 Pie For Huawei P20 Pro CLT-L09 CLT-L29

Download official Android 9.0 Pie For Huawei P20 Pro CLT-L09 CLT-L29 XN Logos 4.5 of 5
B108 Official android 9.0 Pie update For CLT-L09 CLT-L29: Official android 9.0 pie update Now available for the Huawei P20 Pro model ...
B108 Official android 9.0 Pie update For CLT-L09 CLT-L29:
Official android 9.0 pie update Now available for the Huawei P20 Pro model CLT-L09 CLT-L29 Which is Come with EMUI 9.0, the ROM is Not yet available via update Section but You can Download it From This page.
android 9.0 update for the CLT-L09 CLT-L29 is not yet available for all region but on Some Regions Like China and EUROPE it Now available. So if you want to update Your Phone to official android 9.0 Then you can Follow below Instructions/.
Firmware information-
  • Device: Huawei P20 Pro
  • Model No: CLT-L09 CLT-L29
  • Android OS: 9.0
  • EMUI Version: 9.0
  • Oreo: 9.0.0.108
  • Firmware: B108
  • Region: EU
  • Status: Official
  • Type: Full firmware image
  • Size : 1.9 GB
Note-
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your Phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that Your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process 
Download-

CLT-L29C10E2R1P7B108 (9.0.0.108) changelog
CLT-L09C432E5R1P7B108 (9.0.0.108) changelog
Read also-
Method 1 – Update Huawei CLT-L09 CLT-L29 Firmware using HWOTA Tool
1) Requirements for this method.
You need to unlock the bootloader of Your Phone first, Skip it if you already had it unlocked.
Download HWOTA_LON.zip file.[it's a example]

Download the above three files and rename the “update_data_full_public.zip” file to update_data_public.zip and “update_full_hw_usa.zip” to update_all_hw.zip.

2) First download the HWOTA_LON.zip from above and extract it on your PC or your device SD Card.

3) Now download all three update, data, and public files (make sure you rename the files as mentioned above) and copy them either in the external SDCard inside an HWOTA folder or in the PC in the C:\..\HWOTA\update folder.

4) Run the update.bat file as an administrator, It will ask you if you copied the files. Press any key to continue.

5) Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.

6) The above step will install TWRP in your device.

7) Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.

8) Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.

9) If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER.

10) It’ll ask you the update type, again type 1 and press the Enter button twice.

11) Done! Above step will start the installation of files on your device
Method 2 – Update Huawei CLT-L09 CLT-L29  to using HiSuite
1) First you need to download two files.
  • Download Huawei Updater 2.0Download
  • Download Huawei HiSuite ToolDownload

2) Run Huawei Updater, check the box “Custom ROM” and “Custom Port”

3) In Custom ROM enter the correct ROM version for flashing [for example: LON-L29 8.0.0.323 (C432log)]

4) In Custom ROM enter correct ROM URL (For example: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1913/g1699/v99564/f1)

5) Now click on “Start” button and accept waiting alert messages.

6) Now connect your phone to HiSuite. Make sure device recognized by HiSuite and connected properly.

7) In HiSuite windows, open Settings –> General –> Custom Proxy and configure below changes –
Address: 127.0.0.1

Port: 41279

8) Go back to main HiSuite windows and click on “System update”

9) Press Update and wait for download firmware.

10) Your device will reboot and start upgrading.

Method 3 with twrp-
1) Reboot to twrp...

2) create a full ROM backup

3) Now turn off your device.

4) Install/ and flash all 3 zip

5) wait for Success..

6) Done.

So this is a Complete Guide to Huawei CLT-L09 CLT-L29 to Latest version. if you have any question let me know via Comment.
Search tag-
Huawei P20 Pro firmware, Huawei P20 Pro flash file, Huawei P20 Pro download, Huawei P20 Pro cara flash,Huawei P20 Pro android 9. Huawei P20 Pro pie,  pie firmware CLT-L09 CLT-L29, CLT-L09 CLT-L29 android 9 firmware,

No comments

Powered by Blogger.