How to unbrick Repair Honor 9 Lite LLD-L31/LLD-L21

unbrick Repair Honor 9 Lite LLD-L31/LLD-L21:
Step by Step guide to Repair unbrick Huawei Honor 9 Lite LLD-L31/LLD-L21 Here we Share a Working Guide to Repair Bricked Huawei Honor 9 Lite on locked bootloader and locked FRP. This is only a Way to Repair Huawei Honor 9 Lite

For This Process We use DC Phonix Software . You Need DC Phonix Credit to use this Software. after Flashing/Re Branding the Device all NV data are Erased So you Need to Rewrite IMEI Which is Done through HCU Clint Which is also a Service by DC Phonix Team.
Requirements for Locked and Dead Phone:
Requirement For unlocked Phone:
How to Repair Unbrick Honor 9 Lite on unlocked Bootloader:
 Method 1:
  • First of all Make Sure twrp Installed on Your Phone Otherwise Install First
  • Now Download Firmware For Honor 9 Lite From above
  • Now Move all 3 Files " Full Update, Public," to Phone's Storage With HURuupdater in Same Folder
  • Now Create a nandroid backup. Then go to Install and select and Confirm Install
  • Done/after Success Reboot System Now.
Method 2:
  • Download Huawei update Extractor
  • Now Extract Huawei Firmware using the update extractor
  • You Will get boot.img and system.img along with some other files
  • Now Move boot.img and system.img file to adb fastboot tools folder
  • Reboot Phone to Fastboot mod Connect to PC With usb and Flash with below code
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot

  • Done.
How to Repair Honor 9 Lite on Locked bootloader via fastboot:


  • Charge Your Phone up to 100%
  • Now Buy DC phonix credit From here
  • Download & Install DC Phonix Software [ From above]
  • Download & Install Driver [From above]
  • Run “DCPhoenix_v**.exe“.
  • Click on Download Files.
  • Search for your device model no Eg:- “VTR“.
  • Download .app main file and data cust file and .dgtks file for test point method update if your device full bricked no fastboot no recovery etc.
  • Browse the main update file and customization file.
  • Connet your phone into fastboot mode by hold Volume Down and connect USB cable, or upgrade mode by hold Volume Down + Volume Up and connect USB cable.
  • Click on update and Wait for the complete the process.'

Note: If you getting VERLIST partition Error it Means you have Rebranded your devices. So you have to repair vendor/country info then re-update the device go to the link for vendor/country info changing guide.

How to Repair Dead/hard bricked Honor 9 Lite LLD-L31/LLD-L21:
  • Download .dgtks File For Your phone form the DC unlocker 
  • Connect Phone to PC
  • Now Find test Point Pinout of Your Phone and Short Them using Coper Wire
  • Browse the Board Software_inc_testpoint.dgtks file main update file and customization file.
  • Click on update and Wait for the complete the process.
So This is a Complete Guide to Repair Your Phone, have any question let me know via Comment.

: Honor 9 Lite

Post a comment