How to Install Stock Firmware ROM unbrick Lenovo Z5 [L78011]
Official Firmware For Lenovo Z5 [L78011]:

Official Firmware for the Lenovo Z5 [L78011] is Now available for Download, In this article You will Learn How to Flash Lenovo Z5 [L78011] using the QPST aka QFIl tools, it's a easy process and You can Do it using the below instructions.
You ca use Firmware file to unbrick Lenovo Z5 [L78011], to fix Software issue and in Development. The Lenovo Z5 [L78011] is Run on Android 8.XX OS Powered by a Qualcomm Processor and it is also a Dual SIM smartphone with Good Software Specs. Follow below Guide to Install Stock ROM on Lenovo Z5 [L78011],
Note:
- Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
- It will erase all your personal data including data of internal storage, so we advise you first to take a complete backup of your phone and then proceed.
- Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
Read Also-
- How to Repair IMEI Number on Android Devices
- Backup Stock Rom on Android without Recovery via adb
- How to Install HI-Fi Audio System on any Android Device
Requirements-
- Qpst Tools
- Firmware Lenovo Z5 [L78011] [baidu key:tpt6] Here
How to Install official Firmware on Lenovo Z5 [L78011]-
The Whole Process Complete In 2 Steps-- Driver Installation
- Software Upgrade
Driver Installation-
1- Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.
2- After installation, connect Phone to PC using USB cable.
3- While connecting to PC, phone should be switched off and press volume up & down as boot key.
4- If it makes Qualcomm port, then driver has been successfully installed.
2- After installation, connect Phone to PC using USB cable.
3- While connecting to PC, phone should be switched off and press volume up & down as boot key.
4- If it makes Qualcomm port, then driver has been successfully installed.
Software Upgrade-
Step: 1- Download the QPST tool & driver and Rom File From above and extract in Folder,
Step: 2- Make sure your device has the Power to support flashing.
Step: 3- Run QFIL tool.Rom Extract folder,
Step: 2- Make sure your device has the Power to support flashing.
Step: 3- Run QFIL tool.Rom Extract folder,
Step: 4- Click on Browse under the Programmer path to select MBN File.
Step: 5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
Step: 6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
Step: 7- Switch off the device and connect it to PC by pressing Volume up & down key.
Step: 8- Click on Select Port and choose the port.
Step: 8- Click on Select Port and choose the port.

Step: 9- Click on Download to start flashing.

Step: 10- Unplug USB cable, when Finish Download appears.
Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.
So This Is A Complete Guide to Install stock Rom on Lenovo Z5 [L78011] if you have any question Let Us know Via Comment,
Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.
So This Is A Complete Guide to Install stock Rom on Lenovo Z5 [L78011] if you have any question Let Us know Via Comment,
Search tag-
Lenovo Z5 Firmware,Lenovo Z5 Flash File,Lenovo Z5 cara Flash,Lenovo Z5 [L78011] Firmware Download, Lenovo Z5 [L78011] Custom ROM, Downloading for Lenovo Z5 [L78011], Lenovo Z5 [L78011] official ROM,
Post a Comment