Header Ads

How to Install Stock Firmware ROM Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22

How to Install Stock Firmware ROM Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 XN Logos 4.5 of 5
Download official Stock Firmware For Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22: Official Stock Firmware For the Huawei Y5 2018 DRA-LX1/L2...
Download official Stock Firmware For Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22:

Official Stock Firmware For the Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 is Now available For Download. Here we Share Both upgrade and Service Firmware you can use accoding Your Requirement. Service Firmware can be use to Repair a bricked Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22.

The Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 is Run on android 8.xx Oreo. it has a 5.4 Inch Full HD Display. the Device Come with Mediatek MT6739 Processor 2GB of RAM and 16GB of Internal memory can be expandable via SD card.
Note:
  • Please Must Check Correct Model before Downloading
  • Do at own Risk We are Not Responsible for any Damage
  • Follow Step by Step Instructions.
Downloads:

update Firmware:
DRA-L21C33B141 (1.0.0.141)
Tools:
How to Install Stock Firmware on Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22:
if the Phone is Dead here is the unbrick Solution: Here
Method 1:
  1. Download HiSuit From Here 
  2. We register the available update through the Firmware Finder .
  3. Set the DNS address 81.177.139.39 in your network connection.
  4. We connect the phone with HiSuite Running, wait until it Installs the mobile application and join the phone.
  5. In HiSuite, Click "Update" and agree to Install the update found.
  6. Then Cancel the Installation, go to the folder C: \ Users \% username% \ Documents \ HiSuite \ ROM .
  7.   Replace files with the extension ".zip.dbk" with pre-downloaded firmware files ( update.zip, update_full_ * .zip, update_data_full_public.zip ).
  8. Again, Click "Update" and see that the firmware is loaded 100%, after which the download will Start on the Phone.
  9. Restoring the DNS settings to the original value, since during the update authentication, an error like "Server is not available" is possible.
  10. When the firmware is downloaded - the phone will reboot and start the installation.
 Method 2:
  • Download all updated Firmware Files From above and Move Them to Device Storage with HURupdater.zip
  • Now Reboot Phone to twrp Recovery Click backup and Create a nandroid backup
  • Now Go to Install and Install HURupdater.zip
  • Done/
  • Note: The above Process will lock Your Phone's bootloader if it's unlocked.
Search tag:
Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 firmware flash file ROm update unbrick Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 install stock rom,Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 flashing,Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 rom file, Huawei Y5 2018 DRA-LX1/L21 DRA-LX2/L22 stock rom,

No comments

Powered by Blogger.