Header Ads

How to Install Stock ROM unbrick Konka 610

How to Install Stock ROM unbrick Konka 610 XN Logos 4.5 of 5
Stock ROM/Firmware For Konka 610: Official Stock ROM aka Flash File Now available for Konka 610 in the article you Can Download Latest...
Stock ROM/Firmware For Konka 610:

Official Stock ROM aka Flash File Now available for Konka 610 in the article you Can Download Latest Firmware File For Konka 610. You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development.

The Konka 610 is Run on Android 7.1 OS Powered by Mediatek MT6757 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, accelerometer and Ambient light sensor.

Flashing The official Stock Rom on Konka 610 will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Bellow Step by Step guide to Install Official Rom on Konka 610.
Note-
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that Your Phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
Downloads:
  1. SP Flash tools Here
  2. VCom Driver Here
  3. Firmware:
  • Konka 610/7.1/MT6757/All Regions/ Download
Note: if You Will Face any Flashing issue then first load DA File from the Provided ROM Folder Then Flash. 
How to Install Stock ROM on Konka 610-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver Installation cause failure]

Step 3.Download[Tools, ROM, Recovery etc} from above for your device and extract in a folder.

Step 4.Go to Extracted SP tools folder and Run SP Flash tools exe file.{extracted In Above Steps]
Step 5.in SP tools go to Download tab and click on load scatter file and select scatter File From Stock ROM Folder.
Step 6.select what you want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}[if the battery is non Removable switch off phone and connect with battery]
Step 8.wait while flashing is complete it take a few Minut to flash the device after Success. Switch on Your smartphone.
  1. How to bypass FRP on This Phone Here
Search tag-
Konka 610 firmware, Konka 610 Flash File, Konka 610 download, Konka 610 cara flash,Konka 610 flashing, Konka 610 ROM File,

No comments

Powered by Blogger.