How to Install Stock ROM Flash File Karbonn Platinum P9 2018

Stock Firmware/ROM for Karbonn Platinum P9 2018:

official Stock Firmware aka Flash file now available For Karbonn Platinum P9 2018. In the article you can Download tested Flash File for Karbonn Platinum P9 2018 the ROM come in PAC Format Which is Flashable via the SPD flash tools. You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development.

The Karbonn Platinum P9 2018 is Run on Android 8.XX OS Powered by SPREADTRUM Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.

Flashing The official Stock Rom on Karbonn Platinum P9 2018 will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on Karbonn Platinum P9 2018.
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For Karbonn Platinum P9 2018-
File Name Downloads
SPD tools Download
Flash File Karbonn Platinum P9 2018 Download
Driver [Latest] Download
How to Flash Stock Firmware On Karbonn Platinum P9 2018-
  1. Download SPD upgrade Tools From above And extract zip {come with ROM}
  2. Download and Extract Stock Rom file From above
  3. Run upgrade Tools.exe file From setup
  4. Then Click On Load Package then Select PaC{Stock Rom} File From your Firmware Folder
  5. after that Power off your Device and Connect to PC via usb Cable
  6. Then Click on start wait some time While it flash Firmware
  7. after success Disconnect device From PC and Start It you Got Origenal ROM/Software
So This Is the Complete Guide to install stock Rom on Karbonn Platinum P9 2018 if you face any Problem Let us know Via Comment,

How to Bypass FRP:
  • Code: fastboot erase persist
Search tag-
Karbonn Platinum P9 2018 firmware, Karbonn Platinum P9 2018 Flash File, Karbonn Platinum P9 2018 Download, Karbonn Platinum P9 2018 cara flash, Karbonn Platinum P9 2018 flashing, Karbonn Platinum P9 2018 tested flash file without password.

: karbonn

Post a Comment