How to Flash RMX1851 Realme 3 Pro FRP hard Reset bootloop Solution

Stock Firmware for RMX1851 Realme 3 Pro:
official Stock Firmware Now available for the Realme 3 Pro, in the article you can Download latest tested firmware for the Realme 3 Pro, The Firmware is Flashable with the MSM Download tools, In the article you will learn how you can unbrick your Realme 3 Pro  with in 5 Minut.

You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development. The Realme 3 Pro is Run on Android 9.XX OS Powered by Q-COM Snapdragon 710 Processor, it is a Dual SIM (GSM and GSM) Smartphone, Connectivity options Include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.

Flashing The official Stock Rom on RMX1851 Realme 3 Pro Will Erase all your Personal data and You are back on Stock So Make a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on RMX1851 Realme 3 Pro,
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are Not responsible for any damage to your phone.
  3. It will Erase all Your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For RMX1851 Realme 3 Pro-
File Name Download
Driver Download
Firmware RMX1851 Realme 3 Pro Download
Download tool [Both MSM and Download tool] Download
How to Install Stock ROM on RMX1851 Realme 3 Pro-
  1. First of all, Download the file Required From above and extract it on your computer. [In Same Folder]
  2. Now in the Extracted folder, Run the file Named MSM DownloadTool.exe as an administrator
  3. When you see the Screen Load firmware, Now turn off your Phone
  4. Connect your Phone to PC using USB Cable By Pressing VOLUME UP button.
  5. Then Click Start to Being the Flashing. Wait until the installation completes.
  6. Once you see the “Download complete” Message, you can unplug your phone from PC.
Extract MSMDownload tools 4.0 in Firmware folder, it will Not Require Login.

So This is a Complete Guide to Flash RMX1851 Realme 3 Pro  using the Download tool, if you have any question let me know via Comment.
Search tag-
RMX1851firmware, RMX1851 flash file, RMX1851 download, RMX1851 cara flash,RMX1851 flashing,RMX1851 ROM File, RMX1851 download,

: Oppo

Post a comment