How to Flash CPH1945 Oppo Reno2 Z (unbrick repair hard reset)

Stock Firmware for CPH1945 Oppo Reno2 Z:

official Stock Firmware Now available for the CPH1945 Oppo Reno2 Z, in the article you can Download latest tested firmware for the CPH1945 Oppo Reno2 Z, The Firmware is Flashable with the Download tools, In the article you will learn how you can unbrick your CPH1945 Oppo Reno2 Z  with in 5 Minut.You can use Official Firmware to unbrick your Phone to Reset Device functions and in Development.

The CPH1945 Oppo Reno2 Z is Run on Android 9.0 OS Powered by Mediatek MT6779 Octa Core Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include Proximity sensor, Accelerometer and Ambient light sensor.

Flashing The official Stock ROM on Oppo Reno2 Z Will Erase all your Personal data and you are back on Stock So Create a backup before Doing Anything, Follow Below Step by Step guide to Install Official Rom on Oppo Reno2 Z,
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are Not responsible for any damage to your phone.
  3. It will Erase all Your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
  1. How to Repair IMEI on Qualcomm Devices
  2. How to Port twrp for MT67XX Devices [without Source]
  3. How to Repair IMEI Number on Mediatek Devices[ All methods]
  4. How to Flash Qualcomm Devices Using Qualcomm Upgrade tools
Download tools & ROM For Oppo Reno2 Z-
File Name Download
Firmware Download
Firmware CPH1945_11_A.07_190911 Reno2 Z Download
Download tool [Both MSM and Download tool] Download
How to Install Stock ROM on Oppo Reno2 Z-
  1. Download the file Required From above and extract it on your computer. [In Same Folder]
  2. Now in the Extracted folder, Run the file Named DownloadTool.exe as an administrator
  3. When you see the Screen Load firmware, Now turn off your Phone
  4. Connect your Phone to PC using USB Cable By Pressing VOLUME UP button.
  5. Then Click Start to Being the Flashing. Wait until the installation completes.
  6. Once you see the “Download complete” Message, you can unplug your phone from PC.
So This is a Complete Guide to Flash CPH1945 Oppo Reno2 Z using the download tool, if you have any question let Me know via Comment.

Search tag-
CPH1945 Oppo Reno2 Z firmware, CPH1945 flash file, CPH1945 flash tool, CPH1945 Oppo Reno2 Z flash tool download,

: Oppo

Post a Comment