Header Ads

How to Install Stock ROM on Ulefone P6000 Plus (unbrick Repair)

How to Install Stock ROM on Ulefone P6000 Plus (unbrick Repair) XN Logos 4.5 of 5
Stock ROM/Firmware For Ulefone P6000 Plus: Official Stock ROM aka Flash File Now available for Ulefone P6000 Plus in the article You...
Stock ROM/Firmware For Ulefone P6000 Plus:

Official Stock ROM aka Flash File Now available for Ulefone P6000 Plus in the article You Can Download Latest Firmware File For Ulefone P6000 Plus. You can use Official Firmware to unbrick Your Phone to Reset Device Functions and in Development.

The Ulefone P6000 Plus is Run on Android 9.0 & Powered by Mediatek MT6739 Processor, it is a Dual SIM (GSM and GSM) Smartphone, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the Phone include Proximity sensor, accelerometer and Ambient light sensor.

Flashing The official Stock ROM on Ulefone P6000 Plus Will Erase all Your Personal Data and you are back on Stock So Make a backup before doing anything, Follow Bellow Step by Step guide to Install Official ROM on Ulefone P6000 Plus.
Note-
  1. This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
  2. Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
  3. It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
  4. Ensure that Your Phone has at least 50-60% charged to prevent the accidental shutdown in-between the process
Read also-
Downloads:
  1. SP Flash tools Here
  2. VCom Driver Here
  3. Firmware:
  • Ulefone P6000 Plus/9.0/All Regions/ Download
Note: if You Will Face any Flashing issue then first load DA File from the Provided ROM Folder Then Flash. 
How to Install Stock ROM on Ulefone P6000 Plus:
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver Installation cause failure]

Step 3.Download[Tools, ROM, Recovery etc} from above for your device and extract in a folder.

Step 4.Go to Extracted SP tools folder and Run SP Flash tools exe file.{extracted In Above Steps]
Step 5.in SP tools go to Download tab and click on load scatter file and select scatter File From Stock ROM Folder.
Step 6.Select what You Want flash, Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into PC using usb.{if Not Detect then insert battery and connect}[if the battery is non Removable switch off phone and connect with battery]
Step 8.wait until flashing Done. it Will take a few Minut to flash the Device after Success. Switch on Phone.
  1. How to bypass FRP on This Phone Here
Search tag-
Ulefone P6000 Plus firmware, Ulefone P6000 Plus flash file, Ulefone P6000 Plus cara flash,Ulefone P6000 Plus download,

No comments

Powered by Blogger.